[var] => content
[type] => preview
[var] => cut_url
India : +
DIPLOMA MECHANICAL ENGINEERING
Certificate Courses : HS Awareness course,
PTW Permit to work course HSE, FIRST AID
Ultrasonic Testing – ASNT –II
Radiographic Testing – ASNT II
Magnetic particle Testing – ASNT II
Dye penetrating Testing – ASNT –II
years experience in the field of NDT, as a
Techncian . Able to work on own initiative and
as a part of team. Proven technical skill in
performing and evaluating test result. Dedicated
to maintaining highest safety and quality
Presently working In QATAR PETROLEUM
supplied by American Bureau of Shipping,
Plants worked in QP
KHATHIA MAIN, KATHIA NORTH, KATHIA
SOUTH, RGD, FAHAHIL MAIN, NORTH,
SOUTH, JALEGA, UMMBAB, DIYAB, KHUFF
PLANTS, WELL HEADS, and RING MAIN PIPE
LINES, PWI STATION
Equipments worked in QP
Vessels, oil Heater, furnace, heat exchangers, ,
coolers, columns, separators, Pig Launchers,
Pig receiver, Gurda oil storage tanks, Drain
vessels, KO drums, burn bit, burn bit lines, flare
tip& lines, water bath heaters,Glycol Reboilers ,
Regenerator hot oil heater
,chemicalÊstorageÊtanks turbines etc.
Routine , Preshutdown and shut down work.
Reading Isometrics and P&ID, Coordination
with the Processproduction for location of the
equipment and Permit taking. Carry out , UT
shear and compression wave, T/R, Angle probe,
miniature probes with curvature shoes, MPIdry
and wet, and DPI –solvent removable .
Thickness survey in the specified TMLs.
Evaluation of the indication. Report preparation
Company : ABS CONSULTING., DOHA –QATAR
Position : NDT Technician
Work site : QATAR PETROLEUMQP
Duration : Feb to Till Date
• Visual inspection and NDT inspection of pressure vessels , heat exchanger ,
storage tanks and pipeline QATAR PETROLEUM , QP DUKHAN
• Calibration of the UT flaw detector, with V, V, Mock up pieces and draw the
• Weld scanning and equipment, vessels bottom dish, shell, piping scanning for
lamination and corrosion Carried out corrosion surveys on various diameter
• To ensure pipe integrity of Oil and Gas Separation Plant.
• Carried out UTG in peculiar small bore pipes.
• Performed corrosion monitoring and wall thickness measurement in various satellites,
pig launchers, Horizontal pig trap, etc.
• Carried out corrosion monitoring in various well heads.
• UT thickness survey for heater Radiant tubes bends and piping, convection
section piping and bends, DP test for thermocouple and hatch.
• MPI for the Vortex breaker, weir plate and DP inspection for Demister
supports in the Test Separators
• UT scanning in the bottom portion of the Pig Launcher, and receiver for
lamination during routine and MPI inspection inside during shutdown
• MPI in the Absorption column for vortex breaker and catalyst support.
Thickness survey in the shell. MPI in the T joints
• Thickness Survey in the Vessel, equipment and piping through inspection
window in the Hot and Wet insulation.
• Carry out MPI,DP in field weld joints and shop welded joints, for maintenance
and welder qualification test
• Turbine housing and blades DP
• Coolers inlet and out let headers thickness survey and scanning
• Heat exchanger DP /MPI –bundles, channel cover, tie rod, striker plate, baffle
plate, inlet and outlet nozzles.
• Storage tank bottom plate thickness, shell plate thickness, cooling system,
sump, drain system thickness, MPI in the COD
• Prepared various isometric drawings onsite
Employer In : DE TECT UNIT INSPECTION, SOUTH AFRICA
Designation : NDT Inspector
Duration : From Aug TH To TH sep
• Worked in the SASOL power plant and work shop as a NDT inspector
• Review of previous documentation, Drawings, ISO, P & ID etc.
• Checking the calibration of the equipments, maintain the calibration
• Identifying the TMLs from the ISO
• Monitoring the NDT inspection
• Maintain the NDT crew, allocating the job and monitoring
• Reviewing the test results
• Review RT films
• Carryout UT,RT, MPI,DP in urgent situation
• Report preparation and submitting to the client
Employer : G.B Engineering, Trichy.
Designation : NDT Inspector
: Jan to Feb
• Carryout NDT in the Vessels, column, Tower, Cooling coil, Tube bundles fabrication.
• Carry out Radiography inspection of Weld joints in Pipe Lines
• Review the drawing and identifying the RT joints
• Familiar with SWSI, DWDI, DWSI Technique Dia. Ranges from/ inch to
• Carry out Penetrate inspection on weld joints equipments, components such as extension
bellows, pump, casting, shaft etc., in Solvent removable, water washable and fluorescent
• Ultrasonic Testing of boiler drums, pressure vessels, structural steels and butt joints
• Performed UT on Weldments of Heat Exchanger, Boiler Drums required
joints and Raw Materials
• Performed UT on Weldments and RawMaterials Lamination Check for all
Windmill Tubular Towers
Employer : Barth Inspections Services, Trichy
Designation : NDT Technician
Duration : Nov. to Dec.
• Carried out RT, UT, MT & PT for all boiler components. UT scanning for all
pipelines, Vessels and columns etc. Ultrasonic lamination check for piping.
Prepare the Isometric drawings of Piping Modification works. Carried out visual
inspection and corrosion survey for piping.
• Radiographic film processing and film interpretation
• Preparation and submission of Reports & Coordination with clients.
• Corrosion monitoring on various sizes offplot piping & pipelines
Employer : Anand Contractors NDT Unit, Trichy
Designation : NDT Technician
Duration : Feb. to Oct.
• UT Lamination and Thickness survey of ages both erosion and corrosion
components, Vessels, Piping and Tubing of Petroleum, Refinery, Power and
• Radiography of Tanks, Vessels, Pressure parts, prefabricated weld joints of pipes using
XRay and Gamma ray.
• Surface NDT on structural as well as pressure parts on fillet, Buttweld